STORY 01 · ONE WINDOW, THREE LATITUDES

Does a south-facing room always get sunlight? London, New York and Miami compared

A south-facing window in London, New York and Miami can cast very different sun patches. Compare one room across a UK city and northern and southern US locations, keeping the geometry fixed.

Does a south-facing room always get direct sunlight?

No. Diffuse sky light can make a room bright without a distinct sun patch. Direct rays depend on latitude, date, time and obstructions as well as direction. In Northern Hemisphere mid-latitudes, the lower winter Sun can send rays deeper indoors; the higher summer Sun tends to light the floor near the window.

South-facing is not a global rule for the sunniest room. At Southern Hemisphere mid-latitudes, the midday Sun generally lies to the north and the seasons are reversed. Within the tropics, it can move to either side of a building over the year. London, New York and Miami below are all Northern Hemisphere examples, not measurements of anyone’s home.

Compare near local solar noon, rather than at 12 on every clock

Keep a room 4.6 m wide, 4.1 m deep and 2.8 m high. Centre a 1.8 m wide, 1.5 m high window with its sill 0.85 m above the floor. Face it due south, 180°, with obstruction height 0 m and distance 5 m. Compare 21 December 2026 and 21 June 2026 at the representative city coordinates below.

Solar noon is when the Sun reaches its highest altitude that day. We find that maximum with the tool’s existing model, then round to the nearest whole minute supported by its slider: an approximation within half a minute, not an exact astronomical transit. London uses Europe/London: GMT (UTC+0) in December and BST (UTC+1) in June. New York and Miami use America/New_York: EST (UTC−5) in December and EDT (UTC−4) in June. Daylight saving is included, so summer solar noon can appear well after 12:00.

Calculated comparison near local solar noon — not measurements
City / coordinatesDate / local time near solar noonSun altitudeWindow-top ray projection
London
51.5072°, -0.1276°
2026-12-21
11:59 (GMT+0)
15.1°8.74 m — ray meets opposite wall first
London
51.5072°, -0.1276°
2026-06-21
13:03 (GMT+1)
61.9°1.25 m
New York
40.7128°, -74.006°
2026-12-21
11:54 (GMT-5)
25.8°4.85 m — ray meets opposite wall first
New York
40.7128°, -74.006°
2026-06-21
12:58 (GMT-4)
72.7°0.73 m
Miami
25.7617°, -80.1918°
2026-12-21
12:19 (GMT-5)
40.8°2.72 m
Miami
25.7617°, -80.1918°
2026-06-21
13:23 (GMT-4)
87.7°0.10 m

The projection is an ideal ray from the window top, 2.35 m above the floor, onto the floor plane. It is not the length of the entire sun patch or the duration of direct sunlight. London’s December projection is about 8.74 m and New York’s 4.85 m: both rays meet the opposite wall of this 4.1 m room first. Miami’s is about 2.72 m. In June, Miami’s same ray reaches only about 0.10 m from the window. Lower winter rays reach farther, but can also be blocked more easily.

Try Sun in My Room →

Reproduce the UK and US comparisons in Sun in My Room

  1. Enter the south-facing room and window settings above. Select London or New York from the existing city menu.
  2. Select a custom date, then use the slider’s arrow keys to reach that city’s table time. The preset city uses its own time zone, including daylight saving.
  3. Miami has no preset. Choose “Custom location” and enter latitude 25.7617, longitude −80.1918. No device location permission is needed.
  4. Custom coordinates use your browser’s time zone, not Miami’s. For Miami, enter the converted browser date and time below and check the time-zone label in the tool. Keep the geometry fixed when changing the city or season.

The button opens the regular tool page, without filling these settings. Reset any saved settings first. A city query parameter alone cannot preset a city.

A south-facing window can still be shaded

Add a simplified obstruction 10 m high and 10 m away while keeping the rest of the experiment fixed. Its height is relative to the room’s floor, not the building’s height from the street. A low winter ray that travels far indoors may be stopped before it reaches the window. Cloud cover and rain are separate weather conditions, not outputs of this comparison.

This is a simplified geometric simulation. A single obstruction does not reconstruct buildings, trees, balconies, frames, glazing or furniture. It does not predict weather, indoor illuminance, temperature or compliance with local sunlight regulations. Assess a real home with on-site observations and professional measurements.

Principles and sources

Earth’s axial tilt produces seasonal changes; latitude and solar declination affect the Sun’s altitude. All figures come from the tool’s existing SunCalc equation implementation, not measurements or third-party certification. See NOAA’s calculation principles and limitations and the official SunCalc formulas. NOAA says its calculator is no longer maintained; its notes explain principles, not a guarantee of real sunlight.

See where sunlight could reach in your room

Keep one window fixed, then try another latitude and season.

Try Sun in My Room →